This is the power-on and power-off guidance for the Antminer KA3 PSU. To protect your miner, properly turn on and off your Antminer KA3.
1. Two parallel trapezoidal sockets serve as the Antminer KA3’s power plugs. It is advised to use two power cords with a combined current of at least 10A.
2. When turning on the machine, plug in both power cords first, then turn on both power cords simultaneously through the socket switch. To turn off the machine, flip the switch to the off position, then unplug and replug the power cord.
3. If the two power cords cannot be turned on and off at the same time, when powering on the machine, first plug in AC1 on the outside and then AC2 on the inside; when powering off the machine, cut off the AC2 on the inside first, and then off AC1 on the outside.
Please get in touch with us if you have any questions so we can help.